The well-known brand parameters and wiring design of the compressed air flow meter

1. The temperature and pressure compensation function is integrated in the watch body at the same time, which can measure the standard volume flow or standard mass flow of the fluid. 2. Fully intelligent and digital circuit design, which can automatically compensate the measured fluid density or standard volume calculation. 3. The new digital filtering and correction functions make the flow measurement more accurate and reliable. 4. The battery-powered type can work continuously for more than two years without external power supply. 5. The new dot matrix Chinese character LCD display is more convenient to use and operate.
2. The wiring design of the two-wire biogas flow meter that outputs a standard 420mA current signal
The two-wire transmitter that outputs a standard 4'20mA current signal is powered by a DC24V power supply, usually through a two-core shielded cable
(RWP3X0.5m) Connected to the display instrument or computer, the shielding layer should be reliably connected to the ground screw of the amplifier shell. The choice of shielded cable should be suitable for the requirements of the site environment. In addition, the shielded cable should be separated from other strong power lines and cannot be run in parallel. Transmitter terminals

www.kd-gauge.com